INCH-POUND
MIL-DTL-3533C
2 February 2009
SUPERSEDING
MIL-R-3533B
25 April 1964
DETAIL SPECIFICATION
RUBBER, SYNTHETIC; SHEET, STRIP AND MOLDED
INACTIVE FOR NEW DESIGN AFTER 27 JUNE 2001
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for sheet, strip and molded synthetic
rubber for use as torpedo gasket material.
1.2 Classification. Synthetic rubber is of the following types and grades as specified (see
6.2).
Type I
-
O-Rings
Type II
-
Molded parts (other than O-Rings), sheet and strip
Grade A
-
Medium hard
Grade B
-
Medium soft
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
standard. This section does not include documents cited in other sections of this standard or
recommend for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements of documents cited in sections 3, 4, or 5 of this standard, whether or not
they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications and standards
form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
FEDERAL STANDARDS
FED-STD-601
Rubber, Sampling and Testing
Comments, suggestions, or questions on this document should be addressed to Defense
Supply Center Philadelphia (DSCP), ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia,
PA 19111-5096 or e-mail to dscpg&ispecomments@dla.mil . Since contact information can
change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.daps.dla.mil .
AMSC N/A
FSC 5330
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business