MS28774M
TABLE I. Part Numbers and Dimensions. - continued
PART NUMBER |
0M ±.001 |
T |
w |
G |
A° |
MS28774-425 MS28774-426 MS28774-427 MS28774-428 MS28774-429 MS28774-430 MS28774-431 MS28774-432 MS28774-433 MS28774-434 MS28774-435 MS28774-436 MS28774-437 MS28774-438 MS28774-439 MS28774-440 MS28774-441 MS28774-442 MS28774-443 MS28774-444 MS28774-445 MS28774-446 MS28774-447 MS28774-448 MS28774-449 MS28774-450 MS28774-451 MS28774-452 MS28774-453 MS28774-454 MS28774-455 MS28774-456 MS28774-457 MS28774-458 MS28774-459 MS28774-460 |
4.551 4.676 4.801 4.926 5.051 5.176 5.301 5.426 5.551 5.676 5.801 5.926 6.051 6.274 6.524 6.774 7.024 7.274 7.524 7.774 8.024 8.524 9.024 9.524 10.024 10.524 11.024 11.524 12.024 12.524 13.024 13.524 14.024 14.524 15.024 15.524 |
.110 .100 |
.237 .235 |
.008 .000 .010 .000 |
22 +0 -3 |
Notes:
1. Material shall be in accordance with procurement specification: SAE AS8791.
2. Surfaces must be smooth and free from irregularities. Edges must be clean and sharp.
3. Dimension "A" in degrees, all other in inches.
4. For use in packing grooves conforming to MIL-G-5514.
5. In measuring dimensions 0M over a mandrel, the scarf cut shall not exceed dimension "G" and no overlap permitted beyond the full scarf.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business