MS28782E
NOTES:
1. Material: SAE-AS8791.
2. Surfaces must be smooth and free from irregularities.
3. Dimensions in inches.
4. Z gap dimensions to be met with retainer over a mandrel to nominal I.D. +.000, -.002.
5. The retainers and corresponding SAE-AS28775 o-ring part numbers are shown in Table II.
6. Coils to be flat and to remain closed within .250 inch total in the free condition.
7. This standard takes precedence over documents referenced herein.
8. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Custodians: Preparing activity:
Army - AV DLA - IS Navy - AS
Air Force - 99 (Project 5330-2005-005)
Reviewer activities: Army - AR, CR4, MI Navy - MC, SA
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business