MS28932B
TABLE I. Dash numbers and dimensions.
(2) DASH NUMBER |
FORM |
-1 |
BULK STOCK |
(3) C-L |
CUT STOCK |
Notes:
1. Material shall be in accordance with procurement specification C-F-206, Type I, Class 12R1.
2. Example of part number:
MS28932 C-01-08 = Felt strip cut to 1.500 inches in length
Fractions of an inch in sixteenths (.063) Inches
Cut
MS number
MS28932C-09-06 = Felt strip cut to 9 3/8 (9.375) inches in length. MS28932C-15-13 = Felt strip cut to 15 13/16 (15.813) inches in
length.
MS28932-1 = Felt strip bulk material 60 inches in length.
3. Dimension "L" shall be length of cut stock with a tolerance of +.500, -.000 inches.
4. Dimensions in inches. Unless otherwise specified, tolerances: Decimals ±.016, Angles ±5°.
5. Service activities should procure bulk only. Manufacturers shall specify bulk stock in parts and shall furnish spares as bulk stock.
6. For design purposes, this standard takes precedence over procurement specification referenced here-in.
7. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Custodians: Preparing Activity: Navy - AS DLA -IS
Air Force - 99
(Project 5330-2009-011)
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business