MIL-DTL-20078D
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards and handbooks. The following specifications, standards, and handbooks
form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-900 - Rubber Gasket Material, 45 Durometer Hardness.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-289 - Visual Inspection Guide for Rubber Sheet Material.
FEDERAL STANDARDS
FED-STD-601 - Rubber: Sampling and Testing
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch or
www.dodssp.daps.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government
documents, drawings, and publications form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those cited in the solicitation or contract.
BUREAU OF MEDICINE AND SURGERY (BUMED)
BUMED INST 6270.8 - Procedures for Obtaining Health Hazard Assessments Pertaining to
Operational Use of a Hazardous Material.
(Copies of this document are available online at https://bumed.med.navy.mil or from Bureau of Medicine
and Surgery, Department of the Navy, 2300 E Street, NW, Washington, DC 20372-5300.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQC Z1.4 - Sampling Procedures and Tables for Inspection by Attributes. (DoD
adopted)
(Copies of this document are available from www.asq.org or American Society for Quality,
600 North Plankinton Avenue, Milwaukee, WI 53203.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business