MIL-DTL-20078D
(e) Is NEHC toxicity evaluation required? (see 6.4).
6.2.1 Type A-1 and A-2 gaskets should be purchased by the piece. Type B gaskets should be purchased in
rolls of convenient lengths. Lengths of 100 feet are suggested. Since the strip can be bent to conform to corner
radii, no provisions are made to furnish molded corner pieces for this type of gasket.
6.3 Material safety data sheets. Contracting officers will identify those activities requiring copies of
completed Material Safety Data Sheets prepared in accordance with FED-STD-313. In order to obtain the MSDS,
FAR clause 52.223-3 must be in the contract.
6.4 Toxicity evaluation. The NAVENVIRHLTHCEN requires sufficient information to permit a HHA of
the product. Any questions concerning toxicity and requests for HHA should be addressed to the Commanding
Officer, Navy Environmental Health Center, ATTN: Hazardous Materials Department, Industrial Hygiene
Directorate, 620 John Paul Jones Circle, Suite 1100, Portsmouth, VA 20378-2103. Upon receipt of the HHA, a
copy should be provided to Commander, Naval Sea Systems Command, ATTN: SEA 05Z9, 1333 Isaac Hull Ave.,
SE, Stop 5133, Washington Navy Yard, DC 20376-5160.
6.5 Shelf life. This specification covers items where shelf life is a consideration. Specific shelf-life
requirements should be specified in the contract or purchase order. The shelf-life codes are contained in the
Federal Logistics Information System Total Item Record. Additive information for shelf-life management may be
obtained from DoD 4140.27-M, Shelf-life Management Manual, or the designated shelf-life Points of Contact
(POC). The POC should be contacted in the following order: (1) the Inventory Control Points (ICPs), and (2) the
DoD Service and Agency administrators for the DoD Shelf-Life Program. Appropriate POCs for the DoD Shelf-
Life Program can be contacted through the DoD Shelf-Life Management website: https://www.shelflife.hq.dla.mil/.
6.6 Subject term (key word) listing.
Adhesion
Metal strip
Rubber
Sealing Pressure
6.7 Changes from previous issue. Marginal notations are not used in this revision to identify changes
with respect to the previous issue due to the extent of the changes.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business