MIL-DTL-25988C
(Application for copies should be addressed to ASTM International, 100 Barr Harbor Drive, West
Conshohocken, PA 19428-2959, or online at https://www.astm.org/.)
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
ISO 17025
General requirements for the competence of testing and
calibration laboratories
(Application for copies should be addressed to the International Organization for
Standardization (ISO), 1, rue de Varembé, Case postale 56, CH-1211 Geneva 20, Switzerland,
or online at https://www.iso.org/.)
SAE INTERNATIONAL
AMS 2629
Fluid, Jet Reference
AMS 3021
Reference Fluid for Testing Di-Ester (Polyol) Resistant
Material
AS 9100
Quality Management Systems - Aerospace - Requirements-
Technically Equivalent to AECMA prEN 9100
AS 9120
Quality Management Systems - Aerospace Requirements for
Stockist Distributors
(Application for copies should be addressed to SAE World Headquarters, 400 Commonwealth
Drive, Warrendale, PA 15096-0001, or online at https://www.sae.org/.)
2.4 Order of precedence
In the event of a conflict between the text of this document and the references cited herein, the
text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets
The individual item requirements shall be as specified herein and in accordance with the
applicable specification sheet.
3.2 First article
3.2.1 Test report
A test report shall be prepared for each type, class, and grade. An updated test report shall be
prepared whenever a change is made in the materials, processes, or this specification. First
article tests over three years old shall not be acceptable.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business