MIL-DTL-5521C
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-G -5514
Gland Design, Packings, Hydraulic, General Requirements for
MIL-PRF-5606
Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance
MIL-PRF-6083
Hydraulic Fluid, Petroleum Base, for Preservation and Operation
MIL-P-25732
Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Limited
Service at 275 Deg. F (135 Deg C)
DEPARTMENT OF DEFENSE STANDARDS
MS28777
Washer, Flat, Aircraft Hydraulic Backup
MS35803
Washer, Aircraft Hydraulic Packing Backup
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-831
Preparation of Test Reports
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from
the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA
19111-5094.)
2.3 Non-Government publications. The following documents form a part of this specification to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM-B36/B36M
Plate, Brass, Sheet, Strip, and Rolled Bar
ASTM-B139/B139M
Rod, Phosphor Bronze, Bar, and Shapes
(Copies of these documents are available from www.astm.org or the American Society for Testing
and Materials,100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE-AMS-QQ-A-250/4 Aluminum Alloy 2024, Plate and Sheet
SAE-AMS-S-7720
Steel, Corrosion-Resistant (18-8) Bars, Wire and Forging Stock
(Aircraft Quality)
SAE-AMS6350
Steel Sheet, Strip, and Plate 0.95 Cr-0.20 Mo (0.28-0.33C)
(SAE 4130)
(Copies of these documents are available from www.sae.org or the Society of Automotive
Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQ Z1.4
Sampling Procedures and Tables for Inspection by Attributes
(Copies of this document are available from www.asq.org or the American Society for Quality, 600
North Plankinton Avenue, Milwaukee, WI 53203)
2.4 Order of precedence. In the event of a conflict between the text of this document and the reference
cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business