MIL-PRF-2765E
RUBBER MANUFACTURERS ASSOCIATION
Vendors Identification Guide for Molded and Extruded Goods.
(Copies of this document are available from www.rma.org or the Rubber Manufacturers
Association, Inc., 1400 K Street, NW, Suite 900, Washington, DC 20005.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references
cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in
accordance with 4.2.
3.2 Form. The synthetic rubber shall be furnished in the form of sheets, strips, cut, extruded, or molded
rubber material, as specified (see 6.2).
3.2.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible provided that the material
meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life
cycle costs.
3.3 Dimensions and tolerances. Dimensions and tolerances of material shall be as follows:
3.3.1 Dimensions.
3.3.1.1 Sheet and strip material. Unless otherwise specified (see 6.2), dimensions of sheet and strip
material shall be as follows:
a. Sheet rubber shall be furnished in rolls between 35 to 42 inches wide and rolls shall weigh between 90
and 110 pounds.
b. Strip rubber shall be furnished in lengths of 11 or 22 feet within a tolerance of plus or minus 10
percent.
3.3.1.2 Cut, molded and extruded material. The dimensions of cut, molded and extruded material shall be
as specified (see 6.2).
3.3.2 Tolerances. Tolerances for cut, molded, and extruded material shall be as specified (see 6.2).
Unless otherwise specified (see 6.2), tolerances for sheet and strip material shall be as specified in Tables I and II.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business