MIL-R-83248 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, And Compression Set Resistant S/S By Sae-Ams7276, Sae-Ams7259, Sae-Ams3216, And Sae-Ams3218This specification covers high temperature, compression set, and fluid resistant fluorocarbon elastomer sheets, strips, molded parts, an extruded shapes for aeronautical and aerospace applications.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20

MIL-R-83248C

4.5.3.2.2 Sheets, strips, and extruded shapes. The sample unit shall be 1 linear yard, except if the end item is less than 1 linear yard, the sample unit shall be the end item. The dimensions shall be within the tolerances specified in 3.3.1. Dimensions for extruded shapes shall be as specified in the contract or order. The accept-on-zero sample size shall be

as indicated below:

Lot Size 2 - 8	Sample Size entire lot
9 - 90	8
91 - 150	12
151 - 280	19
281 - 500	21
501 - 12,000	27
12,001 - 32,000	35
32,001 - 100,000	38
100,001 - 350,000	46

4.5.3.3 Sampling plan D - inspection for defects in packaging for delivery. An examination in accordance with table VII shall be made to determine that the packaging, packing, and markings comply with section 5 and are in accordance with the applicable methods specified in table VII. The sample unit for this inspection shall be one shipping container fully packed, selected just prior to the closing operation. Shipping containers fully prepared for delivery shall

be inspected for closure defects. The accept-on-zero sample size shall be as indicated below:

Lot Size Sample Size

2 - 50	5
51 - 90	7
91 - 150	11
151 - 280	13
281 - 500	16
501 - 12,000	19
12,001 - 32,000	23
32,001 - 100,000	29
100,001 - 350,000	35