A-A-1184 - Packing Material (Plastic)
A-A-1186 - Oakum (Packing, Jute, Twisted) (S/S By Astm-D681)
This commercial item description covers dry jute fiber rope used for packing cast iron water pipes when joints are sealed with lead.
A-A-1187 - Gasket (Asbestos) (S/S By Astm-F709)
A-A-1188 - Cork Sheet (Packaging & Gasketing) (S/S By Astm-F104)
This commercial item description covers cork composition to be used as cushions and gaskets between glass or porcelain metals and as gaskets for oil pans, cover plates, gear cases, fuel systems, water pumps, transformers, and similar applications.
A-A-1189 - Calking Lead (Packing & Gasketing)
This commercial item description covers lead wool used for calking purposes.
A-A-1719 - Rubber, Sheet, Solid (S/S By Astm-D2000)
This commercial item description covers vulcanized synthetic rubber gasket materials of nominal 50 durometer hardness.
A-A-52302 - Gasket, Split Integral, For Inland Petroleum Distribution System (Ipds) Snap-Joint Coupling
This item description covers a synthetic rubber gasket for use with the 6-inch IPDS snap-joint coupling. Two identical halves of this gasket are made to be a part of the coupling by manually pushing the protruding buttons into the holes provided in the coupling by hand. The gasket is intended for use with petroleum fuels.
A-A-52481 - Gasket, Rubber, Synthetic
This CID covers a synthetic, rubber gasket used between electric receptacle connectors. Gasket is intended to be used for wall and box mounting.
A-A-52524 - Seal, Plain, And Seal, Plain, Encased: Fluid, Radial, Single And Multiple Lip Sealing Member
This commercial item description (CID) covers radial single and multiple lip fluid seals. The seals are intended to be press mounted as rotary shaft seals to retain oil or other fluids. The seals covered by this CID are referred to commercially as "oil seals".
A-A-52524/1 - Seal, Plain Encased: Single Sealing Member, Spring Loaded
This CID covers seals to be used as rotary shaft seals to retain oil and other fluids.
A-A-52524/10 - Seal, Plain Encased: Dual Seals, One Seal Spring Loaded, Shouldered Case
This CIDSS covers seals to be used as rotary shaft seals to retain oil and other fluids.
A-A-52524/11 - Seal, Plain Encased: One Felt, Plus One Leather Or Synthetic Elastomer Sealing Member Spring Loaded
This CIDS cover seals to be used as rotary shaft seals to retain oil ad other fluids.
A-A-52524/12 - Seal, Plain Encased: One Felt And One Leather Or Synthetic Elastomer Sealing Members, Spring Loaded, Shouldered Case
This CIDSS covers seals to be used as rotary shaft seals to retain oil and other fluids.
A-A-52524/2 - Seal, Plain Encased: Dual Seal, Spring Loaded
This CIDSS covers seals to be used as rotary shaft seals to retain oil and other fluids.
A-A-52524/3 - Seal, Plain Encased: Dual Sealing Members, Opposed, Spring Loaded
This CIDSS covers seals to be used as rotary shaft seals to retain oil and other fluids.
A-A-52524/4 - Seal, Plain Encased: Spring Loaded, Flanged Type
This CIDSS covers seals to be used as rotary shaft seals to retain oil and other fluids.
A-A-52524/5 - Seal, Plain Encased: Single Sealing Member, Spring Loaded, Shouldered Case
This CIDSS covers seals to be used as rotary shaft seals to retain oil and other fluids.
A-A-52524/6 - Seal, Plain Encased: Single Seal, External Type, Spring Loaded
This CID covers seals to be used as rotary shaft seals to retain oil and other fluids.
A-A-52524/7 - Seal, Plain Encased: Dual Seal, Internal Seal Spring Loaded
This CIDSS covers seals to be used as rotary shaft seals to retain oil and other fluids.
A-A-52524/8 - Seal, Plain Encased: Dual Sealing Members, Opposed, One Seal Spring Loaded
This CID covers seals to be used as rotary shaft seals to retain oil and other fluids.
A-A-52524/9 - Seal, Plain Encased: Dual Seal, External Seal Spring Loaded
This CIDSS covers seals to be used as rotary shaft seals to retain oil and other fluids.
AN123020THRUAN123119 - Gasket-Aluminum-Non Asbestos, Annular (S/S By Sae-As123020Thruas123119)
AN123851THRUAN123950 - Packing, Performed-Ams 7274 (O) Ring (S/S By Sae-As3570)
AN123951THRUAN124050 - Packing, Performed - Ams7270, 'O' Ring (S/S By Sae-As3569)
AN125901THRUAN125950 - Plug, Straight Thread, "O" Ring Seal, Steel (S/S By Ms9015)
AN3067 - (
Images) Seal Assembly - 3/8 Inch Conduit Boss
AN3119 - ( Images) Gasket - Common, Tail Position Light
AN4171 - Gasket Engine Oil Connection 3 Bolt
AN4172 - Gasket Engine Oil Connection 4 Bolt
AN6225 - ( Images) Packing - "V" Ring Hydraulic
AN6226 - ( Images) Packing-"U" Cup Hydraulic
AN6227 - ( Images) Packing, O, Ring Hydraulic (S/S By Ms28775)
AN6228 - ( Images) Adapter - "V" Ring Female Hydraulic Packing
AN6229 - Adapter, V Ring Male Hydraulic Packing
AN6230 - ( Images) Gasket, "O" Ring Hydraulic (S/S By Ms28775)
AN6232 - Felt&Strip Packing Gland
AN6238 - ( Images) Gasket, Hydraulic Replaceable Reservoir Type Filter Element
AN6246 - Ring-Hydraulic Packing Back Up (After 21 Aug 1964 Use Ms 35803)
AN886 - Gasket, Anchor & Light Cover
AN887 - ( Images) Gasket-Circular Formation Light Cover
AN889 - Gasket, Wing Position Light Cover
AN896 - ( Images) Gasket, Cabin Dome-Light Cover
AN898 - Gasket, Exterior Light Cover
AN899 - ( Images) Gasket, Fuselage Light - Cover Screw (S/S By Sae-As8991)
AN900 - Gasket, Copper-Asbestos Annular (Use Ms-35769)
AN901 - ( Images) Gasket-Metal Tube Connection Seal
AN902 - Gasket - Flared Tube, Universal Fitting (S/S By An6290)
AN903 - Gasket, Downward Recognition Light Cover
AN904 - ( Images) Gasket And Upward Recognition Light Cover
HH-C-551 - Cork And Rubber Composition Gaskets, Sheets And Strips
HH-C-576 - Cork Sheet (Gaskets, Sheets, And Strips) (S/S By Astm-F104)
HH-C-576 - Cork Sheet (Gaskets, Sheets, And Strips) (S/S By Astm-F104)
This specification covers cork composition to be used as cushions and gaskets between glass or porcelain and metal; and as gaskets for oil pans, cover plates, gearcases, fuel systems, water pumps, transformers, and similar applications.
HH-G-101 - ( Images) Gasket, Metallic-Encased (S/S By Sae-Ams-Hh-G-101)
HH-G-116 - Gaskets, Plumbing Fixture Setting (Use Hh-C-536)
HH-G-156 - Gasket Material, General Purpose; Rubber Sheets, Strips, And Special Shapes
HH-G-160 - Gasket, Rubber, Molded Or Extruded, For Concrete Non-Pressure Sewer Pipe
HH-G-71 - Gasket, Asbestos-Copper, Corrugated
HH-G-76 - Gaskets, Asbestos Metallic Cloth (S/S By Astm-F709)
This specification covers metallic cloth gaskets for use with flanged joints.
HH-P-00118 - Packing Material (Asbestos, Lubricated)
HH-P-106 - Packing Material, Flax Or Hemp (S/S By Mil-P-24752)
HH-P-112 - Packing, Hydraulic
HH-P-117 - Packing, Jute, Twisted
HH-P-119 - Packing Material, Sewer Joint, Asphalt-Saturated Cellulose-Fiber
This specification covers a rope-like, asphalt-impregnated cellulose-fiber, packing material.
HH-P-125 - Packing Material, Wick, Cotton, Round
HH-P-126 - Packing, Metallic, Flexible
HH-P-128 - Packing, Metallic, Flexible, Condenser&Tube
HH-P-131 - Packing, Metallic And Nonmetallic, Plastic
HH-P-151 - Packing; Rubber-Sheet, Cloth-Insert
HH-P-166 - Packing Material, Semimetallic
HH-P-171 - ( Images) Packing, Spiral, Gland, Low-Pressure
HH-P-31 - Packing Material, Asbestos, Metallic Cloth And Tape
Tbis specification covers fibrous glass metallic cloth and tapepacking for boiler casing access openings or insulation lagging pads and heavyweight, rubber treated fibrous glass cloth and tape for pipe flange joint gaskets.
HH-P-34 - Packing, Asbestos, Rod, Braided
HH-P-36 - Packing Material, Asbestos, Rod, High-Pressure
HH-P-41 - Packing, Asbestos, Rope And Wick (S/S By Mil-P-70343)
This specification covers asbestos rope and wick pakcing for use in sealing against steam, high temperature air or gases, hot water, and similar conditions for temperatures up to 500 Deg F.
HH-P-46 - ( Images) Packing: Asbestos, Sheet, Compressed (See Notice 2 For Replacement Information)
This specification covers two classes of compressed asbestos sheet packing materials for use in pipe joints.
HH-P-51 - Packing, Asbestos, Valve-Stem
HH-P-61 - Packing, Diaphragm
HH-P-71 - Packing, Fabric, Condenser-Tube
HH-P-91 - Packing, Fiber, Hard, Sheet
HH-P-96 - Paper, Gasket: Fiber (Animal Or Plant), Sheet (S/S By Astm-F104)
JAN-P-1116 - Protector, Edge, Packing Case
JAN-P-534 - Packing, Coil-Form, Stuffing-Tube And Terminal-Tube (For Electric Cables) (S/S By Mil-P-16685)
MIL-A-17472 - Asbestos Sheet, Compressed (Gasket Material) (Use Hh-P-46)
MIL-A-24058 - Asbestos Packing And Gasketing Material, Impregnated
This specification covers coil and ring type braided asbestos packings for valve stems and pumps, asbestos sheet for use in die cut gaskets, and asbestos paper for use in spirally wound metal-asbestos gaskets - all for use in contact with hot water.
MIL-C-269 - Cotton, Calking
MIL-C-6183 - Cork And Rubber Composition Sheet, For Aromatic Fuel And Oil Resistant Gaskets (S/S By Sae-Ams-C-6183)
This specification covers vulcanized sheet made of granulated cork uniformly dispersed in a synthetic rubber compound, for use in gaskets where aromatic fuel or oil resistance is required.
MIL-DTL-16685 - Packing, Material And Packing Preformed (Stuffing Tube For Electric Cables)
This specification covers rounded packing on spools or reels and preformed packing for electric cable seals in stuffing tubes.
MIL-DTL-20078 - Gasket, For Ballistic Doors And Hatches
This specification establishes the requirements for metal inserted rubber gaskets and two -line rubber gaskets for ballistic doors and hatches (see 6.1).
MIL-DTL-22050 - Gasket And Packing Material, Rubber For Use With Polar Fluids, Steam, And Air At Moderately High Temperatures
This specification covers rubber gaskets, packing, seals, strips, material for use in hot air, hot water, steam, and various polar fluids such as aqueous monoethanolamine (MEA), at moderately high temperatures (see 6.1).
MIL-DTL-24130/1 - Metallic Seal Rings, Non-Integral Nickel-Chromium-Iron Alloy (Uns6600)
This specification contains detailed requirements for nickel-chromium-iron alloy (UNS N06600) non-integral metallic seal rings for subsequent hermetic seal welding.
MIL-DTL-24293 - Packing, Hydraulic, Leather, Cattlehide, Mineral-Tanned, Impregnated
This specification covers packing composed of impregnated, mineral tanned leather.
MIL-DTL-25988 - Rubber, Fluorosilicone Elastomer, Oil-And-Fuel Resistant, Sheets, Strips, Molded Parts, And Extruded Shapes
This specification covers oil- and -fuel-resistant fluorosilicone elastomer rubber sheets, strips, molded parts, and extruded shapes for aeronautical and aerospace applications.
MIL-DTL-3533 - Rubber, Synthetic; Sheet, Strip And Molded
This specification covers the requirements for sheet, strip and molded synthetic rubber for use as torpedo gasket material.
MIL-DTL-432 - Gaskets, Nonmetallic, Synthetic Rubber
This specification covers five types of synthetic rubber, nonmetallic gaskets.
MIL-DTL-5516 - Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C)
This specification covers preformed packings for use where resistance to hydraulic fluid conforming to specification MIL-PRF-5606 is required at temperatures from -65 Degrees to 160 Degrees F (-54 Degrees to 71 Degrees C).
MIL-DTL-5521 - Washer, Aircraft Hydraulic Packing Back-Up
This specification establishes the requirements for one type of packing back-up washers for use in aircraft hydraulic systems.
MIL-DTL-81716 - Packing, Preformed, Straight Thread Tube Fitting Boss, Type Ii Hydraulic (-65 Degrees F To +275 Degrees F )
This specification covers one type of elastomeric straight threaded tube fitting boss packings for use in 3000 psi (20.68 MPa) hydraulic systems using MIL-PRF-5606 fluid throughout a temperature range of -65 Degrees F to +275 Degrees F (-54 Degrees C to +135 Degrees C).
MIL-DTL-83397 - Rubber, Polyurethane, Castable, Humidity Resistant
This specification covers parts made from castable, general purpose, polyurethane rubber.
MIL-E-16090 - Cork-Composition, Gaskets And Sheets (Use Hh-C-576)
MIL-F-13532 - Felt, Hair, Hard (For Blank Ammunition)
MIL-F-81265 - Fiber, Asbestos
This specification covers the requirements of one type of Chrysotile asbestos.
MIL-G-0021032 - Gaskets, Metallic Asbestos, Spiral Wound (S/S By Mil-G-24716)
This specification covers spiral wound metallic-asbestos gaskets for use in both pipeline joints and other applications where pressure and temperature conditions do not exceed 2500 pounds per square inch (psi) and 1050 deg F.
MIL-G-1086 - Gasket Material, Synthetic Rubber (For Bolted Steel Tanks) (S/S By Mil-R-6855)
MIL-G-11639 - Gaskets, Rubber For Cartridge Storage Cases, Smokeless Powder Boxes And Tanks
MIL-G-12803 - Gasket Material, Non-Metallic (S/S By Astm-F104)
This specification covers gasket stock made from non-metallic materials and suitable for general automotive, aeronautical and other mechanical applications. This specification does not cover molded gaskets, rubber or plastic sheet gaskets which are covered by other specifications.
MIL-G-15342 - Gaskets, Metallic, Spiral Wound For Boilers
This specification covers metallic spiral wound gaskets for handholes and manholes of shipboard and stationary boilers. Steam generators for nuclear plants are excluded.
MIL-G-16265 - Gaskets, Metallic-Flexible Graphite And Metallic-Asbestos, Spiral Wound (For Navy Flanged Joints In Piping Systems)
This specification covers gaskets of Navy design for use in Navy flanged joints in steam piping systems for temperature up to and including 875 degrees Fahrenheit (F).
MIL-G-16959 - Gaskets; Metallic, Boiler, Economizer And Superheater Handhole
This specification covers metallic gaskets for use on 2 - inch round handholes of boiler econmizers and superheaters.
MIL-G-18586 - Gasket, O-Ring, Shipboard Electrical Junction Box (Use Mil-P-5516)
MIL-G-20103 - Gaskets (For Box, Ammunition, Caliber .30, 719, And Box, Ammunition, Caliber .50,M2)
MIL-G-20241 - Gasket Material, Wool Felt, Impregnated, Adhesive, Pressure-Sensitive (S/S By Zz-R-765 And Mil-I-24391)
MIL-G-21032 - Gasket, Metallic Asbestos, Spiral Wound (S/S By Mil-G-24716 Or Ansi-B16.20)
MIL-G-21569 - Gaskets, Cylinder Liner Seal, Synthetic Rubber
This specification covers synthetic rubber O-rings and other forms of gaskets.
MIL-G-21610 - Gaskets, Heat Exchanger, Various Cross Section Rings, Synthetic Rubber
This specification establishes the requirements for synthetic rubber gaskets for use in heat exchangers.
MIL-G-23652 - Gasket And Packing Material Petroleum And Phosphate Ester Fluid Resistant (S/S By Mil-R-83248)
MIL-G-23983 - Gasket And Packing Material, Oil Resistant Rubber, Access Hull Applications
This specification establishes the requirements for synthetic rubber gasket and packing material for use in hatches, torpedo tube doors and other hull penetrations of underwater vehicles.
MIL-G-24102 - Gasket, Rubber, For Use In Air Systems Up To 6,000 Psig Pressure (Use Mil-G-23652)
MIL-G-24696/1 - Gasket, Sheet, Non-Asbestos, Sizes And Tolerances (S/S By Mil-Dtl-24696)
MIL-G-24748 - Gaskets, Metallic And Rubber, For Use In Union Pipe Fittings 1/4 To 2-Inch Nps With Various Fluids From -30 Degrees Fahrenheit (-34 Degrees Celsius) To 400 Degrees Fahrenheit (204 Degrees Celsius)
This specification covers gaskets, metallic and rubber, consisting of a nitrile or ethylene-propylene rubber inner ring attached to a copper-alloy cast outer metallic ring for use as a static seal in union connections of piping systems in air, water, steam, and petroleum products.
MIL-G-29170 - Gaskets, Synthetic Rubber, Reinforced (For Drydock Caissons)
MIL-G-3820 - Gasket, Synthetic Rubber, Reinforced (For Drydock Caissons)
MIL-G-38426 - Gasket Material, Tetrafluoroethylene Resin, Glass-Filled, Cryogenic Application
MIL-G-46873 - Gasketing, Metallic Mesh, Cylindrical
MIL-G-46898 - Gasketing, Rf And Pressure
MIL-HDBK-212 - Gasket Materials (Nonmetallic)
MIL-HDBK-692 - A Guide To The Selection Of Rubber O-Rings
This handbook lists the currently available types of O-rings for which military or nationally recognized technical society specifications exist, and indicates the environments to which each type of O-ring is resistant. Plastic or metal O-rings fabricated from rubber in combination with other materials, and ring shaped packings and gaskets with other than round cross sections are not included. Information relative to the effect of a particular fluid on various elastomers is not included in this handbook (see 3).
MIL-J-2829 - Joint Sealing Packing
MIL-L-13188 - Leather, Cattlehide, Chrome-Tanned: Hydraulic Packing (For Recoil Mechanisms)
This specification covers chrome-tanned, cattlehide leather for use as hydraulic packing in recoil mechanisms of ordnance material.
MIL-M-24130 - Metallic Seal Rings, Non-Integral General Specification For
This specification contains general requirements, quality assurance provisions, and instructions for manufacture, testing, and delivery of non-integral metallic seal rings for subsequent hermetic seal welding.
MIL-M-24130/2 - Metallic Seal Rings, Non-Integral Steel, Corrosion-Resistant
MIL-M-24130/3 - Metallic Seal Rings, Non-Integral Nickel Copper Alloy
MIL-P-11501 - Packings, Gaskets, & Fillers, Preformed, Rubber Or Synthetic Rubber (For Recoil Mechanism).
MIL-P-11719 - Packing, Preformed, Pneumatic Hose Couplings, Universal
This specification covers a 3/4-inch preformed rubber packing for use with pneumatic hose couplings.
MIL-P-1220 - Packing Material, Wick, Cotton, Round
MIL-P-1342 - Packing Material (Lead, Shredded)
MIL-P-1384 - Packing, Synthetic-Rubber, Cloth-Insertion (Symbol 2353) (Use Hh-P-151)
MIL-P-14574 - Packing (Wiper Ring), Synthetic Rubber, Cloth Insertion
This specification covers one type of synthetic rubber packing, conforming to M1BC 610 of ASTM D2000, used on recoil mechanisms as a wiping ring for the recoiling gun type.
MIL-P-16332 - Packing, Flax, Graphite-Coated, Waterproof, Hydraulic-Coils
MIL-P-16374 - Packing Material (Metal Covered, For Stern Tubes) (Use Mil-P-24377)
MIL-P-16404 - Packing, Asbestos
This specification covers five types of asbestos packing material for use in hydraulic and mechanical components.
MIL-P-16725 - Packing Material (Spiral, Low-Pressure, Plastic)
MIL-P-17303 - Packing Materials, Plastic Metallic And Plastic Nonmetallic (See Notice 1 For Replacement Information)
This specification covers plastic metallic packings and plastic nonmetallic packings for high and low pressure valve stems and reciprocating rods handling saturated and superheated steam service and for rotary and reciprocating pumps handling water, gasoline and oil-on naval ships.
MIL-P-17349 - Packing Material, Rod, High Pressure, Asbestos (Use Mil-P-24377)
MIL-P-17350 - Packing Material, Semimetallic, Symbol 1400 (Use Mil-P-24377)
MIL-P-17416 - Packing Material, Metallic, Flexible
This specification covers flexible metallic packing (Symbol 1430) for use on reciprocating rods, rotary rods, valve stems, and outside packed plungers.
MIL-P-17553 - Packing, Preformed, O Ring, Synthetic Rubber
This specification covers synthetic rubber O-ring preformed packing used to provide both a high-pressure and a low-pressure seal within rockets.
MIL-P-17577 - Packing Material, Asbestos, Rod, Braided (Use Hh-P-34)
MIL-P-17578 - Packing Material, Plastic (For Dogs For Watertight Closures) (Symbol 1425)
This specification covers plastic packing materials (symbol 1425) consisting of a highly viscous oily binder with a finely ground lubricant filter.
MIL-P-18017 - Packings, 275 Deg. F Hydraulic Systems, Aircraft (S/S By Mil-P-25732)
MIL-P-18469 - Packings, Asbestos, Water Jacket
MIL-P-18484 - Packing, Preformed, Hydraulic-Seal, Synthetic-Rubber (Use Mil-P-5516)
MIL-P-1881 - Packing, Rubber, For Submarine Mines
MIL-P-18871 - Packing, Preformed, Synthetic Rubber, Tubular Spliced Ring, Shipboard Fluorescent Lighting Fixture Closure
MIL-P-18954 - Packing Material, Nickel-Chromium-Iron Alloy Braided
MIL-P-19152 - Packings, Hydraulic, High Pressure (For Hydroneumatic Systems)
This specification covers high pressure hydraulic packings used for sealing the counter-recoil plungers and the differential cylinder pistons and rods of hydropneumatic systems.
MIL-P-19918 - Packing, V Ring
MIL-P-20084 - Packing Material, Ramie-Fiber (Use Mil-P-24377)
MIL-P-20085 - Packing, Sheet, Plant - Or Animal-Fiber (S/S By Hh-P-96)
MIL-P-20099 - Packing, Vulcanized Asbestos-Metallic (For Small Arms).
MIL-P-21099 - Packing Assembly, Hydraulic Conical And V Types, Fire Resistant Type Hydraulic Fluids
This specification covers packing assemblies for safety type hydraulic fluid service such as elevators, hoists and steering gears.
MIL-P-24074 - Polytetrafluoroethylene Parts And Coatings And Polyamide Parts
This specification covers seals, packings, gaskets and parts of polytetrafluoroethylene (TFE), filled and unfilled, TFE resin finished, and polyamide plastics unfilled.
MIL-P-24377 - Packing Material, Asbestos, Braided, Impregnated With Ptfe (Polytetrafluoroethylene), Surface Lubricated (See Notice 3 For Replacement Information)
This specification covers a braided asbestos packing, impregnated with polytetrafluoroethylene (PTFE), and lubricated with a petroleum lubricant, for general service, when the service temperature does not exceed 500 Degrees Fahrenheit (Degrees F).
MIL-P-24396 - Packing Material, Braided Ptfe (Polytetrafluoroethylene)
This specification covers three types of braided polytetrafluoroethylene (PTFE) yarn packing impregnated with PTFE dispersion. All types of packing are for service on Naval ships when stuffing box temperatures are limited to a maximum of 450 deg. F.
MIL-P-24503 - Packing Material, Graphitic, Corrugated Ribbon Or Textured Tape And Preformed Ring
This specification covers various types, classes and grades of non-woven graphitic packing for steam valve service on Naval ships on which valve stuffing box temperatures are limited to a maximum of 1000 deg. F.
MIL-P-24583 - Packing Material, Graphitic Or Carbon Braided Yarn
This specification establishes the requirements for staple or continuous filament graphitic or carbon yarn packing. Packing is for steam valve service on naval ships.
MIL-P-24752 - Packing Material, Flax Or Hemp
This specification covers flax or hemp packing material for use in hot or cold water, brine and fuel oil systems (see 6.1).
MIL-P-25732 - Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Limited Service At 275 Deg. F (135 Deg. C)
This specification covers O-ring packings for use with petroleum based hydraulic fluids conforming to MIL-H-5606 and MIL-H-83282 over the temperature range of -65 Deg. to 275 Deg. F (-54 Deg. to 135 Deg. C).
MIL-P-2693 - Packing Material, Cold Storage Door Gasketing, Nonwatertight
MIL-P-2911 - Packing Assembly, Hydraulic Conical And V Types
This specification covers packing assembling for hydraulic fluid service such as elevators, hoists, and steering gears.
MIL-P-2983 - Packing, Formed Asbestos For Small Arms
MIL-P-45904 - Packing, Asbestos, Acid Resistant
MIL-P-5315 - Packing, Preformed, Hydrocarbon Fuel Resistant (S/S By Sae-Ams-P-5315)
This specification covers hydrocarbon fuel resistant O-ring preformed packings of the sizes shown on MS29512 and MS29513 and of one grade only.
MIL-P-5510 - Packing, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 Deg. To 160 Deg. F) (S/S By Sae-Ams-P-5510)
This specification covers requirements for the material, design, testing and packaging of straight thread tube fitting boss packings.
MIL-P-70343 - Packing, Fiberglass, Rope And Wick (S/S By Astm-F2087)
This specification covers the general requirements and tests for rope and wick fiberglass packing used for boiler seals for service temperatures up to 1000 deg. F.
MIL-P-82744 - Packing, Preformed, Otto Fuel Compatible, (Code Ident 53711)
This specification covers standard requirements for construction and testing of Otto fuel compatible preformed packing for use in torpedo fuel tanks and fuel delivery systems.
MIL-P-82745 - Packing, Preformed, Hydraulic Oil Compatible, (Code Ident 53711)
This specification covers standard requirements for construction and testing of hydraulic oil compatible preformed packing for critical and item applications.
MIL-P-83461 - Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Improved Performance At 275 Deg. F (135 Deg. C) (S/S By Sae-Ams-P-83461)
This specification covers 0-ring packings for use with petroleum based hydraulic fluids conforming to MIL-H-5606 and MIL-H-83282 over the temperature range of -65degrees to 275 degrees F (-54 degrees to 135 degrees C). This material gives improved high temperature performance over materials conforming to MIL-P-25732.
MIL-P-87175 - Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Phosphonitrilic Fluoroelastomer
This specification covers O-ring packings for use with petroleum based hydraulic fluids conforming to MIL-H-5606 and MIL-H-83282 over the temperature range of -65 degrees to 275 degrees F (-54 degrees to 135 degrees C).
MIL-P-87175/1 - Packings, Preformed, Petroleum Hydraulic Fluid Resistant, Phosphonitrilic Fluoroelastomer, Grade 70 Sizes And Tolerances
MIL-P-87175/2 - Packings, Preformed, Petroleum Hydraulic Fluid Resistant, Phosphonitrilic Fluoroelastomer, Grade 80, Sizes And Tolerances
The purpose of the specification sheet is to set up a standardized part numbering system for O-rings procured to MIL-P-87175, Grade 80.
MIL-P-954 - Packing, Hydraulic, Rubber Friction Fabric Layers
MIL-PRF-1149 - Gasket Materials, Synthetic Rubber, 50 And 65 Durometer Hardness
This specification covers vulcanized synthetic rubber gasket materials of nominal 50 and 65 durometer hardness.
MIL-PRF-15624 - Gasket Material, Rubber, 50 Durometer Hardness (Maximum)
This specification establishes the requirements for synthetic rubber materials for gaskets 50 durometer hardness (maximum).
MIL-PRF-17927 - Gaskets, Flame Resistant Hinged Closure
This specification covers gaskets for use on hinged closures where flame resistance and fume containment are required.
MIL-PRF-19769 - Gaskets, Synthetic Rubber Oil Resistant, Slide Valve (For 21-Inch Submerged Torpedo Tubes)
This specification covers submarine slide valve gaskets, using oil resistant synthetic rubber.
MIL-PRF-24790 - Packing Material, Braided, Non-Asbestos
This specification establishes the requirements for braided non-asbestos packing material for rotary, centrifugal, and reciprocating pumps handling various fluids and gases on naval ships.
MIL-PRF-2765 - Rubber Sheet, Strip, Extruded, And Molded Shapes, Synthetic, Oil Resistant
This specification covers an oil-resistant type of synthetic rubber material for gaskets.
MIL-PRF-2863 - Packing, Preformed, Condenser Tube, Non-Asbestos
This specification establishes the requirements for preformed packing assemblies for sealing to tube-to-tubesheet joints in main and air-ejector type steam condensers.
MIL-PRF-900 - Rubber Gasket Material, 45 Durometer Hardness
This specification covers rubber gasket material for watertight and airtight closures, in the temperature range of -20 Deg. to 130 Deg. F (-28.9 Deg. to 54.4 Deg. C), and other uses.
MIL-R-11512 - Rubber, Synthetic (For Seals, In Liquid-Filled Components).
MIL-R-1229 - Rubber Sheet Packing, Solid, Wire Cloth Inserted, Symbol 2354
MIL-R-14328 - Rubber Sheet, Synthetic, Medium Soft, General-Purpose Gasket Material (For Extreme Climatic Conditions)
This specification covers synthetic rubber gasket materials for extreme climatic conditions.
MIL-R-15058 - Rubber, Shaft Covering Materials (For Marine Propeller Shafts)
This specification covers materials and techniques used to protect propeller shafts from corrosion.
MIL-R-19655 - Rubber Sheet, Solid, Molded Forms, Synthetic, High Pressure Gasket Use
MIL-R-21252 - Rubber Sheet, Solid, Synthetic, Shipboard Water Evaporator Gasketing
This specifiction covers gasket material for use in shipboard water stills.
MIL-R-25897 - Rubber, Fluorocarbon Elastomer, High-Temperature, Fluid Resistant (Use Mil-R-83248)
MIL-R-25988/1 - Rubber, Fluorosilicone Elastomer, Oil- And Fuel Resistant, O-Rings, Class 1, Grade 70
The purpose of this specification sheet is to set up a standardized part numbering system for 0-rings procured to MIL-R-25988, Class 1, Grade 70.
MIL-R-25988/2 - Rubber, Fluorosilicone Elastomer, Oil- And Fuel-Resistant, O-Rings, Class 3
The purpose of this specification sheet is to set up a standardized part numbering system for o-rings procured to MIL-R-25988, Class 3.
MIL-R-25988/3 - Rubber, Fluorosilicone Elastomer, Oil- And Fuel-Resistant, O-Rings, Class 1, Grade 60
The purpose of this specification sheet is to set up a standardized part numbering system for o-rings procured to MIL-R-25988, Class 1, Grade 60.
MIL-R-25988/4 - Rubber, Fluorosilicone Elastomer, Oil- And Fuel-Resistant, O-Rings, Class 1, Grade 80
The purpose of this specification sheet is to set up a standardized part numbering system for o-rings procured to MIL-R-25988, Class 1, Grade 80.
MIL-R-2778 - Rubber Sheet, Solid, Unvulcanized, High Graphite, Gasket Use, Symbol 2352
This specification covers unvulcanized rubber sheet with high graphite content for gasket use.
MIL-R-2879 - Rubber (Synthetic), Cellular, Chemically Blown And/Or Expanded (S/S By Mil-R-6130)
MIL-R-5049 - Ring Wiper, Piston Rod
This specification covers piston rod wiper rings capable of removing dirt and ice (see 6.1).
MIL-R-7582 - Rubber Sheet, Solid And Molded Shapes, Aromatic And Non-Aromatic Fuel Resistant
This specification covers the requirements for a synthetic rubber suitable for sealing integral fuel in aircraft.
MIL-R-81555 - Rubber, Fluorocarbon, Sheet, Molded, And Extruded Shapes
MIL-R-83248 - Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, And Compression Set Resistant (S/S By Sae-Ams7276, Sae-Ams7259, Sae-Ams3216, And Sae-Ams3218)
This specification covers high temperature, compression set, and fluid resistant fluorocarbon elastomer sheets, strips, molded parts, an extruded shapes for aeronautical and aerospace applications.
MIL-R-83285 - Rubber, Ethylene-Propylene, General Purpose (S/S By Sae-Ams-R-83285)
MIL-R-83412 - Rubber, Ethylene-Propylene, Hydrazine Resistant (S/S By Sae-Ams-R-83412)
This specification covers three types of rubber having good resistance to high and low temperature and hydrazine type propellants, but poor resistance to hydrocarbon oils or solvents.
MIL-R-83485 - Rubber, Fluorocarbon Elastomer, Improved Performance At Low Temperatures (S/S By Sae-Ams-R-83485)
This specification covers high temperature, compression set, and fluid resistant fluorocarbon elastomer sheets, strips, molded parts, and extruded shapes for aeronautical and aerospace applications.
MIL-R-8791 - Retainer, Packing, Hydraulic, And Pneumatic, Tetrafluoroethylene Resin (S/S By Sae-As8791)
MIL-S-12772 - Seal, Discharge
MIL-S-19622/16 - Stuffing Tube, Nylon, Size 1: Packing Assemblies For
MIL-S-19622/17 - Stuffing Tube, Nylon, Size 2: Packing Assemblies For
MIL-S-19622/18 - Stuffing Tube, Nylon, Size 3: Packing Assemblies For
MIL-S-19622/19 - Stuffing Tube, Nylon, Sizes 4 And 4T: Packing Assemblies For
MIL-S-19622/20 - Stuffing Tube, Nylon, Size 5: Packing Assemblies For
MIL-S-19622/21 - Stuffing Tube, Nylon, Size 6: Packing Assemblies For
MIL-S-19622/22 - Stuffing Tube, Nylon, Size 7: Packing And Assemblies For
MIL-S-19622/23 - Stuffing Tube, Nylon, Size 8: Packing Assemblies For
MIL-S-19622/24 - Stuffing Tube, Nylon, Size 9: Packing Assemblies For (For New Design Use Astm-F1836M)
MIL-S-21481 - Seal, Neoprene Rubber, High Hardness
MIL-S-21558 - Seal, Oil, Plain Or Plain Encased
This specification covers oil, plain or plain encased, seals for rotating or oscillating shafts used in Naval ordnance equipment.
MIL-S-45005 - Seal, Plain, And Seal, Plain, Encased, Fluid, Radial, Single And Multiple Lip Sealing Member, Spring-Loaded (S/S By A-A-52524)
MIL-S-46874 - Seal, Rf And Pressure
This specification covers the requirements for strips of material consisting of knitted Monel metal bonded to closed cell chloroprene rubber, which functions both as an RF and pressure seal.
MIL-S-47147 - Seals, Rubber Extrusions, Non-Cellular
This specification covers the requirements for non-cellular rubber extrusions of four different shapes.
MIL-STD-1523 - Age Controls Of Age-Sensitive Elastomeric Materiel (For Aerospace Applications) (S/S By Sae-As1933 And Sae-Arp5316)
This document establishes requirements for the maximum ages of age sensitive elastomeric items for use in military aircraft and missiles and for space vehicles at the time of acceptance by a Government acquiring activity. The provisions of this document apply to hoses and O-rings from specific classes of elastomers which are resistant to lubricants, hydraulic fluids, and petroleum base fuels and which conform to the specifications cited herein.
MIL-STD-413 - Visual Inspection Guide For Elastomeric O-Rings (See Notice 2 For Replacement Information)
The objective of this standard is to assure acquisition of elastomeric O-rings with a surface quality level adequate for their intended use.
MS15181 - Washer, Leather, Swivel Connection (For Pressed Metal Lavatory)
MS15217 - Gasketing, Rubber, Molded, Oil-Resistant, Lst Bow Ramp And Lsd And Lpd Stern Gate
MS16171 - Washer, Nonmetalic, Slip, Nylon Stuffing Tube
MS16172 - Washer, Nonmetalic, Retainer, Nylon Stuffing Tube
MS16651 - Gasket, Manhole
MS16720 - Gasketing, Rubber, Molded, Oil-Resistant, Lcu Bow Ramp
MS17413 - Packing, Preformed - Ams 7278, Fluorocarbon Rubber, (O) Ring (Use Ms 9388)
MS24690 - Packing, Preformed - High Pressure Air Valve
MS26577 - ( Images) Gasket, Airport Marker Light Base
MS27194 - ( Images) Seal, Plain, Rubber, (Minus 65 To Plus 160 Deg. F Fuel Resistant), Mold In Groove (S/S By Sae-As27194)
MS27195 - ( Images) Seal, Plain, Rubber, Synthetic Oil Resistant, (Minus 65 To Plus 275 Deg F), Mold In Groove (S/S By Sae-As27195)
MS27196 - ( Images) Gasket, Rubber, Fluid Resistant, Oils, Synthetic Oils, And Fuels (Minus 65 To Plus 400 Deg. F) Mold In Groove (S/S By Sae-As27196)
MS27197 - ( Images) Seal Plain, Rubber, (Hot Resistant 400 Deg. F) Mold In Groove (S/S By Sae-As27197)
MS27198 - ( Images) Seal, Plain, Rubber, (Minus 65 To Plus 350 Deg. F Fuel Resistant) Mold In Groove (S/S By Sae-As27198)
MS27595 - ( Images) Retainer, Packing Backup, Continuous Ring, Polytetrafluoroethylene
MS27605 - Seal, Aircraft Wheel Bearings (Large Diameter)
MS28772 - ( Images) Packing,Preformed ("D" Ring, Shock Strut) (S/S By Sae-As28772)
MS28773 - ( Images) Retainer, Packing Back-Up, Tetrafluoroethylene, Straight Thread Tube Fitting Boss
MS28774 - ( Images) Retainer, Packing Backup, Single Turn, Polytetraflouroethylene
MS28777 - ( Images) Washer, Flat, Aircraft Hydraulic Backup
MS28782 - ( Images) Retainer, Packing, Back-Up, Teflon
MS28783 - ( Images) Ring, Gasket, Back-Up, Ptfe
MS28784 - Packing, (O) Ring, Hydraulic, -275 Deg. F. (Use Ms 28775)
MS28932 - ( Images) Felt Strip, Packing Gland
MS29524 - ( Images) Gasket - Adapter Locking Flange, Pressure Fuel Servicing
MS29537 - ( Images) Gasket, Cap, Outlet Fitting, Booster Pump
MS33666 - ( Images) Packing, Preformed - Aeronautical Elastomeric, Range Of Sizes (S/S By Sae-As568)
MS33668 - ( Images) Packing, Preformed, Elastomeric, Tube Fitting, Range Of Sizes (S/S By Sae-As568)
MS33675 - ( Images) Scraper, Installation, Packing, Gland Ring
MS3393 - ( Images) Packing, Preformed, Straight Thread Tube Fitting Boss, Hydraulic, Minus 65 Deg. F. To Plus 275 Deg. F. (S/S By Sae-As33931)
MS35147 - Gasket, Copper
MS35148 - Gasket, Rubber
MS35347 - ( Images) Gasket, Filter, Fluid, Pressure (S/S By F-F-351/6)
MS35513 - Gasket Forming Compound, Non-Hardening, Colors, Container Sizes, And Use Characteristics Thereof
MS35514 - Compound, Pipe Joint, High Temperature
MS35515 - Compound, Pipe Joint, Bituminous
MS35537 - Gasket Paste
MS35769 - ( Images) Gasket, Metallic, Encased, Annular, Copper (S/S By Sae-As35769)
MS35803 - ( Images) Washer, Aircraft Hydraulic Packing Backup
MS35894 - Gasket (Rectangular)
MS51000 - ( Images) Seal, Plain Encased, Single Sealing Member, Spring Loaded (S/S By A-A-52524/1)
MS51001 - ( Images) Seal, Plain Or Seal, Plain Encased, Non-Spring Loaded, Single Sealing Member (S/S By A-A-52524/13)
MS51007 - ( Images) Gasket, Rubber, Synthetic (S/S By Sae-As51007)
MS51906 - ( Images) Seal, Plain Encased, Dual Seal, Spring Loaded (S/S By A-A-52524/2)
MS51907 - ( Images) Seal, Plain Encased, Dual Sealing Members, Opposed, Spring Loaded (S/S By A-A-52524/3)
MS51908 - ( Images) Seal, Plain Encased, Spring Loaded, Flanged Type (S/S By A-A-52524/4)
MS51909 - ( Images) Seal, Plain Encased, Single Sealing Member, Spring Loaded, Shouldered Case (S/S By A-A-52524/5)
MS51910 - ( Images) Seal, Plain Encased, Single Seal, External Type, Spring Loaded (S/S By A-A-52524/6)
MS51911 - ( Images) Seal, Plain Encased, Dual Seal, Internal Seal Spring Loaded (S/S By A-A-52524/7)
MS51912 - ( Images) Seal, Plain Encased, Dual Sealing Members, Opposed, One Seal Spring Loaded (S/S By A-A-52524/8)
MS51913 - ( Images) Seal, Plain Encased, Dual Seal, External Seal Spring Loaded (S/S By A-A-52524/9)
MS51914 - ( Images) Seal, Plain Encased, Dual Seals, One Seal Spring Loaded, Shouldered Case (S/S By A-A-52524/10)
MS51915 - ( Images) Seal, Plain Encased, One Felt, Plus One Leather Or Synthetic Elastomer Sealing Member Spring Loaded (S/S By A-A-52524/11)
MS51916 - ( Images) Seal, Plain Encased, One Felt And One Leather Or Synthetic Elastomer Sealing Members, Spring Loaded, Shouldered Case (S/S By A-A-52524/12)
MS51917 - ( Images) Seal, Plain Encased: Single Felt Sealing Member, Internal Type (S/S By A-A-52524/14)
MS51918 - ( Images) Seal, Plain Encased: Single Felt Sealing Member, External Type (S/S By A-A-52524/15)
MS51919 - ( Images) Seal, Plain Encased: Single Felt Sealing Member, Internal Type, Shouldered Case (S/S By A-A-52524/16)
MS51920 - ( Images) Seal, Plain Encased, Single Sealing Member, Extended Case (S/S By A-A-52524/17)
MS51921 - ( Images) Seal, Plain Encased: Single Sealing Member, Face Type (S/S By A-A-52524/18)
MS52000 - ( Images) Gasket, Rubber, Synthetic (S/S By A-A-52481)
MS90064 - ( Images) Packing, Preformed, Round (For Use With Waveguide Flanges And Dummy Loads) (S/S By A-A-55549)
MS90065 - ( Images) Gasket, (Rectangular, For Use With Waveguide Flange)
MS90066 - Gasket, Metal, Spring Finger, Mx-1106/U
MS90067 - Gasket, Metal, Spring Finger, Mx-1107/U
MS90068 - Gasket, Metal, Spring Finger, Mx-1108/U
MS90069 - Gasket, Metal, Spring Finger, Mx-1109/U
MS90070 - Gasket, Metal, Spring Finger, Mx-1110/U
MS90071 - Gasket, Metal, Spring Finger, Mx-1111/U
MS90072 - Gasket, Metal, Spring Finger, Mx-1223/U
MS90073 - Gasket, Metal, Spring Finger, Mx-1230/U
MS90074 - Gasket, Metal, Spring Finger, Mx-1231/U
MS90075 - Gasket, Metal, Spring Finger, Mx-1232/U
MS90133 - ( Images) Gaskets, V - Groove; Part Of Rf Coaxial Connectors
MS90134 - ( Images) Gaskets; Part Of Rf Coaxial Connectors
MS9020 - ( Images) Packing, Preformed, (O) Ring (S/S By Sae-As3578)
MS9021 - ( Images) Packing, Preformed, (O) Ring (S/S By Sae-As3578)
MS9058 - ( Images) Ring Back Up, Boss Connection, Ams 3652, Ams 3656, Ams 3660, Ams 3667 (S/S By Sae-As9058)
MS9068 - ( Images) Packing, Preformed - Ams 3304, O Ring (Asg) (S/S By Sae-As3582)
MS9134 - ( Images) Gasket - Type X Or Xv Engine Accessory Drive (S/S By As3491)
MS9135 - ( Images) Gasket, Type Xi Engine Accessory Drive (S/S By As3492)
MS9136 - ( Images) Gasket - Type Xii, Xiv-A, Xiv-B, Xiv-E, Xvii-A And Xvii-B Engine Accessory Drive (S/S By As3493)
MS9137 - ( Images) Gasket - Type Xiii Engine Accessory Drive (S/S By As3494)
MS9138 - ( Images) Gasket - Type Xiv-C And Xiv-D Engine Accessory Drive (S/S By As3495)
MS9139 - ( Images) Gasket - Type Xvi, Xvii-C, -D, -E And -F Engine Accessory Drive (S/S By As3496)
MS9140 - Gasket - Type X1X Engine Accessory Drive (S/S By Sae-As3497)
MS9141 - ( Images) Gasket - Metal O-Ring, .035 Tube X .006 Wall, Cres (S/S By Sae-As9141)
MS9142 - ( Images) Gasket - Metal O-Ring, .062 Tube X .006 Wall, Cres (S/S By Sae-As9142)
MS9144 - ( Images) Gasket - Type Xx Engine Accessory Drive (S/S By Sae-As9144)
MS91607 - ( Images) Gasket, Series Lc Connectors
MS91608 - Gasket, Series Lc Connectors
MS91609 - Gasket, Series Lc Connectors
MS9202 - ( Images) Gasket - Metal O-Ring, .062 Tube X .010 Wall (S/S By Sae-As9202)
MS9203 - ( Images) Gasket - Metal O-Ring, .094 Tube X .006 Wall, Cres (S/S By Sae-As9203)
MS9204 - ( Images) Gasket - Metal 0-Ring, .094 Tube X .010 Wall, Cres (S/S By Sae-As9204)
MS9205 - ( Images) Gasket - Metal 0-Ring, .125 Tube X .010 Wall, Cres (Asg) (S/S By Sae-As9205)
MS9241 - ( Images) Packing, Preformed - Rubber, O Ring (S/S By Sae-As3551)
MS9355 - ( Images) Packing, Preformed, O Ring (S/S By Sae-As3551)
MS9371 - ( Images) Gasket - Metal O-Ring, .035 Tube X .006 Wall, Silver Plated (S/S By Sae-As9371)
MS9372 - ( Images) Gasket - Metal O-Ring, .062 Tube X .006 Wall, Silver Plated (S/S By Sae-As9372)
MS9373 - ( Images) Gasket - Metal O-Ring, .062 Tube X .010 Wall Silver Plated (S/S By Sae-As9373)
MS9374 - ( Images) Gasket - Metal O-Ring, .094 Tube X .006 Wall, Silver Plated (S/S By Sae-As9374)
MS9375 - ( Images) Gasket - Metal O-Ring, .094 Tube X .010 Wall, Silver Plated (S/S By Sae-As9375)
MS9376 - ( Images) Gasket - Metal O-Ring, .125 Tube X .010 Wall, Silver Plated (S/S By Sae-As9376)
MS9377 - ( Images) Gasket - Engine Accessory Drive (S/S By Sae-As3498)
MS9385 - ( Images) Packing, Preformed, Ams 7267, O-Ring (S/S By Sae-As9385)
MS9386 - ( Images) Packing, Preformed - Ams 7267, (O) Ring (S/S By Sae-As9386)
MS9387 - ( Images) Packing, Preformed, Ams 7278, "O-Ring" (S/S By Mil-R-83248/1)
MS9388 - Packing, Preformed, Ams 7278, O-Ring (S/S By Mil-R-83248/1)
MS9484 - Ring-Back-Up, Boss Connection, Ams 3651 (See Dwg Ms9058)
MS9770 - ( Images) Packing, Preformed - Ams 3650 (S/S By Sae-As9770)
MS9771 - ( Images) Packing, Preformed - Ams 3650, Seal (S/S By Sae-As9771)
MS9772 - ( Images) Packing, Preformed - Ams 3617, ,O, Ring (S/S By Sae-As9772)
MS9773 - ( Images) Packing, Preformed - Ams 3617, Seal
MS9955 - ( Images) Packing, Preformed - Ams 3668, ,O, Ring (S/S By Sae-As9955)
MS9956 - ( Images) Packing, Preformed - Ams 3668, Seal (S/S By Sae-As9956)
MS9966 - ( Images) Packing, Preformed - Ams 7273 Seal (S/S By Sae-As9966)
MS9967 - ( Images) Packing, Preformed - Ams 1273, ,O, Ring (S/S By Sae-As9967)
MS9970 - ( Images) Packing, Preformed - Ams 7279, O Ring (S/S By Sae-As3581)
NAS1412 - Gasket, Sealing, Custom Design
NAS1523 - Packing With Retainer
NAS1613 - Packing, Preformed, Ethylene Propylene Rubber, Seal Element
This specification establishes requirements for elastomer seal elements for use in hydraulic systems using phosphate ester fluids.
QPL-15342-20 - Gaskets, Metallic, Spiral Wound, For Boilers (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-16265-15 - Gasket, Metallic-Asbestos, Spiral-Wound (For Navy Flanged Joints In Piping Systems)
QPL-16374-23 - Packing Material (Metal Covered For Stern Tubes)
QPL-16685-7 - Packing, Preformed (Stuffing-Tube For Electric Cables-Shipboard Use)
QPL-17303-46 - Packing Materials, Plastic Metallic And Plastic Nonmetallic
QPL-17349-11 - Packing Material, Rod, High-Pressure, Asbestos
QPL-17350-8 - Packing Material, Semimetallic (Symbol 1400)
QPL-17416-18 - Packing Material, Metallic, Flexible (Replaced By The Qualified Products Database (Qpd) See Notice 3 For Additional Information)
QPL-17472-30 - Asbestos Sheet, Compressed (Gasket Material)
QPL-18469-2 - Packing, Asbestos, Water Jacket
QPL-18586-11 - Gaskets, 0-Ring, Shipboard Electrical Junction Box
QPL-19152-3 - Packings, Hydraulic, High Pressure (For Hydropneumatic Counter-Recoil Systems Of Gun Mounts)
QPL-20084-5 - Packing, Ramie-Fiber (Symbol 1290)
QPL-20241-26 - Gasket Material, Wool Felt, Impregnated Adhesive, Pressure-Sensitive
QPL-21032-9 - Gaskets, Metallic-Asbestos, Spiral Wound (For Asa Commercial Flanged Joints In Piping Systems)
QPL-21099-32 - Packing Assemblies, Hydraulic Conical And V Types Fire Resistant Type Hydraulic Fluids
QPL-21569-13 - Gasket, Cylinder Liner Seal O-Ring, Synthetic Rubber
QPL-21610-5 - Gasket, Heat Exchanger, Various Cross Section Ring, Synthetic Rubber
QPL-24102 - Gasket And Packing Material, Rubber, Resistant To Petroleum-Base Lubricants, For Use In Air Systems Up To 6,000 Psig Pressure
QPL-24696-4 - Gasket, Sheet, Non-Asbestos (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24790-6 - Packing Material, Braided, Non-Asbestos (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-25732-18 - Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Limited Service At 275 Deg. F (135 Deg C) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-25897-12 - Rubber, High Temperature, Fluid Resistant
QPL-2765-24 - Rubber Sheet, Strip, Extruded, And Molded Shapes, Synthetic, Oil Resistant
QPL-2863-23 - Packing, Preformed, Condenser-Tube, Non-Asbestos (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-2911-23 - Packing Assembly, Hydraulic Conical And V Types
QPL-3533-9 - Rubber, Synthetic, Sheet, Strip And Molded
QPL-432-18 - Washers, Nonmetallic, Drum Plug, Synthetic Rubber
QPL-45005-14 - Seal, Plain And Seal, Plain, Encased: Fluid, Radial, Single And Multiple Lip Sealing Member, Spring Loaded
QPL-5049-30 - Ring, Wiper, Piston Rod (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-5315-23 - Packing, Preformed, Hydrocarbon Fuel Resistant
QPL-534-10 - Packing, Coil-Form, Stuffing-Tube And Terminal-Tube (For Electric Cables)
QPL-5510-17 - Packing, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 Deg. To 160 Deg.F) (S/S By Qpl-Ams-P-5510)
QPL-5516-17 - Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Deg. F
QPL-5521-14 - Washer, Aircraft Hydraulic Packing Back-Up
QPL-6183-12 - Gasket And Sheet Casket Material Synthetic Rubber And Cork Composition
QPL-7021-9 - Asbestos Sheet, Compressed, For Fuel, Lubricant, Coolant, Water, And High Temperature Resistant Gaskets
QPL-83248-3 - Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, And Compression Set Resistant
QPL-83461-6 - Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Improved Performance At 275 Deg. F (135 Deg. C) (Refer To Pri-Qpl-Ams-83461-2)
QPL-87175-6 - Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Phosphonitrilic Flouroelastomer
QPL-HH-P-46-15 - Packing, Asbestos, Sheet, Compressed
QQ-C-40 - Calking, Lead Wool And Lead Pig
QQ-L-156 - Lead, Calking (Use Qq-C-40)
T-C-30 - Calking Cotton (Use T-O-56)
T-O-56 - Oakum, Marine
ZZ-G-710 - Gasket Material, Rubber 35 Durometer Hardness
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business