MIL-PRF-1149D
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in
sections 3 and 4 of this specification. This section does not include
documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they
must meet all specified requirements documents cited in sections 3 and 4 of
this specification, whether or not they are listed.
2.2
Government documents.
2.2.1 Specifications, standards, and handbooks. The following
specifications, standards, and handbooks form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these
documents are those listed in the issue of the Department of Defense Index of
Specifications and Standards (DoDISS) and supplement thereto, cited in the
solicitation (see 6.2).
STANDARDS
DEPARTMENT OF DEFENSE
MIL-STD-289 - Visual Inspection Guide for Rubber Sheet
Material.
MIL-STD-298 - Visual Inspection Guide for Rubber Extruded
Goods.
MIL-STD-407 - Visual Inspection Guide for Rubber Molded
Items.
(Unless otherwise indicated, copies of the above specifications,
standards, and handbooks are available from the Standardization Document Order
Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part
of this document to the extent specified herein. Unless otherwise specified,
the issues of the documents which are DoD adopted are those listed in the
issue of the DoDISS cited in the solicitation. Unless otherwise specified,
the issues of documents not listed in the DoDISS are the issues of the
documents cited in the solicitation (see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D 395 - Standard Test Methods for Rubber Property -
Compression Set. (DoD adopted)
ASTM D 412 - Standard Test Methods for Rubber Properties in
Tension. (DoD adopted)
ASTM D 471 - Test Method for Rubber Property - Effect of
Liquids.
ASTM D 573 - Standard Test Method for Rubber -
Deterioration in an Air Oven. (DoD adopted)
ASTM D 792 - Standard Test Methods for Specific Gravity
(Relative Density) and Density of Plastics by
Displacement. (DoD adopted)
ASTM D 2137 - Standard Test Methods for Rubber Property -
Brittleness Point of Flexible Polymers and
Coated Fabrics. (DoD adopted)
ASTM D 2240 - Standard Test Method for Rubber Property -
Durometer Hardness. (DoD adopted)
ASTM F 104 - Standard Classification System for Non-
Metallic Gasket Materials. (DoD adopted)
(Application for copies should be addressed to the American Society
for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA
19428-2959.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business