MIL-PRF-1149D
TABLE V.
Conformance inspection.
Test
Requirement
Test method
Group A:
Width and length
3.3
4.3.2.1
Thickness
3.3
4.3.2.1
Identification markings
3.5
4.3.2.1
Workmanship
3.6
4.3.2.1
Group B:
Tensile strength and
Table II
4.5.2 and 4.5.6
ultimate elongation
4.5.3 and 4.5.7
Hardness
Table II
4.5.4
Specific gravity
Table II
4.5.9
Brittleness point
Table II
Group C:
4.5.8
Hot compression set
Table II
4.5.10
Water extraction
Table II
4.5.11
Oil resistance
Table II
4.5.12
Phosphate ester
Table II
resistance
4.5.13
Fuel resistance
Table II
4.3.1
Sampling.
4.3.1.1 Lot. For the purposes of sampling for examinations and tests,
a lot shall consist of one type and class of material of the same form and
dimensions produced in one plant under essentially the same conditions, not to
exceed 2,500 pounds, and offered for delivery at one time. In each case the
number of pieces shall be the lot size.
4.3.1.2 Sampling for examination of material. Samples shall be taken
at random from each lot according to the sampling plan as specified in table
VI for the examination specified in 4.3.2.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business