MIL-DTL-5516D
FEDERAL STANDARDS
FED-STD-601
Rubber; Sampling and Testing
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-G-5514
Gland Design; Packings,Hydraulic, General Requirements For
(Inactive for new design)
MIL-PRF-5606
Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance
(Inactive for new design)
MIL-PRF-6083
Hydraulic Fluid, Petroleum Base, for Preservation and Operation
MIL-P-25732
Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Limited
Service at 275 Deg. F (135 Deg.C) (Inactive for new design)
DEPARTMENT OF DEFENSE STANDARDS
AN6225
Packing "V" Ring Hydraulic (Inactive for new design)
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-831
Preparation of Test Reports
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from
the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA
19111-5094.)
2.3 Non-Government publications. The following documents form a part of this specification to
the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM B36/B36M
Brass Plate, Sheet, Strip, and Rolled Bar
ASTM B139/B139M
Phosphor Bronze, Rod, Bar, and Shapes
ASTM D91
Precipitation Number of Lubricating Oils
ASTM D412
Vulcanized Rubber and Thermoplastic Elastomers Tension
ASTM D573
Rubber Deterioration in an Air Oven
ASTM D792
Density and Specific Gravity (Relative Density) of Plastics by
Displacement
ASTM D2240
Rubber Property Durometer Hardness
(Copies of these documents are available from www.astm.org or the American Society for Testing
and Materials, 10 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE-AMS-QQ-A-250/4 Aluminum Alloy 2024, Plate and Sheet
SAE-AMS-S-6758
Steel, Chrome-Molybdenum (4130) Bars and Reforging Stock
(Aircraft Quality)
SAE-AMS 6345
Steel Sheet, Strip, and Plate 0.95 Cr 0.20 Mo (0.28 0.33C)
(SAE 4130) Normalized or Otherwise Heat Treated
SAE-ARP-5316
Storage of Elastomer Seals and Seal Assemblies which
Include an Elastomer Element Prior to Hardware Assembly
(Copies of these documents are available from www.sae.org or the Society of Automotive
Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business