MIL-DTL-81716A
DEPARTMENT OF DEFENSE STANDARDS
AND10050
Bosses, Standard Dimensions for Gasket Seal Straight
Thread
MIL-STD-413
Visual Inspection Guide for Rubber Elastomeric O-Rings
MS21344
Fittings Installation of Flared Tube, Straight Threaded
Connectors, Design Standard for
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia,
PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to
the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
ASME B46.1
Surface Texture (Surface Roughness, Waviness, and
Lay)
(Copies of this document are available from www.asme.org or the American Society of
Mechanical Engineers International, Three Park Avenue, M/S 10E New York, NY 10016-5990.)
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQ Z1.4
Sampling Procedures and Tables for Inspection by
Attributes.
(Copies of this document are available from www.asq.org or the American Society for
Quality, 600 North Plankinton Avenue, Milwaukee, WI 53203.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM B36/B36M
Plate, Brass, Sheet Strip, and Rolled Bar
ASTM B139/B139M
Rod, Phosphor Bronze, Bar, and Shapes
ASTM D91
Precipitation Number of Lubricating Oils
ASTM D573
Rubber Deterioration in an Air Oven
ASTM D792
Density and Specific Gravity (Relative Density) of
Plastics by Displacement
ASTM D1414
Rubber O-Rings
ASTM D2240
Rubber Property Durometer Hardness
(Copies of these documents are available from www.astm.org or the American Society
for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
AMERICAN SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE AMS-QQ-A-250/4
Aluminum Alloy 2024, Plate and Sheet
SAE AMS-QQ-A-250/12
Aluminum Alloy 7075, Plate and Sheet
SAE AMS-QQ-P-416
Plating, Cadmium (Electrodeposited)
SAE AMS4029
Aluminum Alloy Sheet and Plate (2014; -T6 Sheet,
-T651 Plate) Solution and Precipitation Heat Treated
SAE AMS6345
Steel, Sheet, Strip, and Plate 0.95 Cr 0.20 Mo
(0.28 0.33C) (SAE 4130) Normalized or
Otherwise Heat Treated
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business