MIL-DTL-81716A
4. VERIFICATION
4.1 Classification of inspection. The inspection of packings shall be classified as follows'
(a) First article inspection (see 4.2)
(b) Conformance inspection (see 4.3)
4.2 First article inspection. First article inspection shall consist of all of the inspections of this
specification conducted in the order listed under 4.5 and in Table I.
4.2.1 Sampling for first article inspection. First article test samples shall be as specified in
Table I and shall include the following:
(a)
24
SAE AS33931, MS3393-3 packings
(b)
4
SAE AS33931, MS3393-4 packings
(c)
4
SAE AS33931, MS3393-8 packings
(d)
4
SAE AS33931, MS3393-12 packings
(e)
58
SAE AS33931, MS3393-16 packings
(f)
3
ASTM hardness discs (.250 in. (6.35 mm) thick, with a 1.0 in (25.4 mm).
diameter)
4.2.1.1 Hardness discs. Hardness discs shall be formulated, processed, and cured the
same as the accompanying packing. The packings shall represent the manufacturer's production
product, particularly with respect to stock preparation, mold design, mold finish, and molding
technique.
4.3 Conformance inspection. Conformance inspection shall consist of sampling inspections
only, conducted in the order listed in Table II.
4.3.1 Sampling inspection. A random sample shall be selected from each inspection lot or
batch in accordance with Table II and shall be subjected to the inspections therein.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business