MIL-PRF-15624G
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
BUREAU OF MEDICINE AND SURGERY (BUMED)
BUMED INST 6270.8
-
Occupational Health Hazard Assessment
(Copies of this document are available from the Bureau of Medicine and Surgery, Department of the Navy,
2300 E Street, NW, Washington DC 20372-5300 or online at https://navymedicine.med.navy.mil.)
NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS
S9510-AB-ATM-010
-
Nuclear Powered Submarine Atmosphere Control Manual
(Copies of the chapter titled "Material Control Program" are available online at https://smcl.dt.navy.mil or from
Commander, Naval Sea Systems Command, ATTN: SEA 05Z4, 1333 Isaac Hull Ave. SE Stop 5122, Washington
Navy Yard, DC 20376-5122.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASTM INTERNATIONAL
ASTM D395
-
Standard Test Methods for Rubber Property - Compression Set. (DoD
adopted)
ASTM D412
-
Standard Test Methods for Vulcanized Rubber and Thermoplastic
Elastomers - Tension. (DoD adopted)
ASTM D471
-
Standard Test Method for Rubber Property - Effect of Liquids. (DoD
adopted)
ASTM D573
-
Standard Test Method for Rubber - Deterioration in an Air Oven. (DoD
adopted)
ASTM D792
-
Standard Test Methods for Density and Specific Gravity (Relative
Density) of Plastics by Displacement. (DoD adopted)
ASTM D2240
-
Standard Test Method for Rubber Property - Durometer Hardness. (DoD
adopted)
ASTM D2565
-
Standard Practice for Xenon-Arc Exposure of Plastics Intended for
Outdoor Applications. (DoD adopted)
(Copies of these documents are available from ASTM International, 100 Barr Harbor Dr., PO Box C700, West
Conshohocken, PA 19428-2959 or online at www.astm.org.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between
the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2 and 3.1.1), a sample shall be subjected to first article inspection in
accordance with 4.2.
3.1.1 First article inspection. First article inspection shall be performed when one or more of the following
apply:
a.
Upon initial offering of a material to the government by the vendor.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business